Trendnet Security Camera Pan/Tilt Internet Camera Server Manuel d'utilisateur télécharger pdf (Page 88)

- 87 -

A.2 GPIO Terminal Application

Typically used in association with programming scripts for

developing applications for motion detection, event triggering, alarm

notification via e-mail, and a variety of external control functions. The

GPIO connectors are located on the rear panel of the camera, which

provide the interface of connecting the sensor device (IN) and

controlled device (OUT).

Connector Pin Assignment

PIN SPECIFICATION

Active High voltage 9~40V DC;

Dropout-out voltage 0V DC

OUT Close circuit current 70mA AC or 100mA DC maximum,

Output resistance 30 Ohm;

Open circuit voltage 240V AC or 350V DC maximum

Interface Schematic

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 99 100

Pas de commentaire

Trendnet Security Camera Pan/Tilt Internet Camera Server Manuel d'utilisateur Page 88