Trendnet Network Router USB 2.0 & IDE Network Storage Enclosure Manuel d'utilisateur

Quick Installation Guide TS-I300TS-I300W

8Q1:A1: Q2:A2: Can I connect or disconnect the USB storage device while the TS-I300/TS-I300W is on? Yes, you can connect or disconnect any external US

Q4:A4: All the settings are correct, but I can not make a wireless connection to the TS-I300W.If you still encounter problems or have any questions r

Copyright ©2006. All Rights Reserved. TRENDnet. 3135 Kashiwa StreetTorrance, CA 90505USAProduct Warranty RegistrationPlease take a moment to register

Table of Contents Table of ContentsVersion 07.06.2006 English ...

System RequirementsApplication Web Browser: Internet Explorer (5.5 or higher) A computer with a network adapter properly installed.A network Switch or

2. Hardware InstallationEnglish21. Remove the two screws from the rear panel to detach the cover.2. Make sure the jumper settings on the hard drive

English36. Attach the mounting stand to the Storage Server.7. Connect a RJ-45 cable from the Switch/Hub to the LAN port of the Storage Server and then

English42. Click on Search device, and then select the Storage Server.3. Configure the IP (IP address), Network (Subnet mask), Gateway and then click

English55. Click Format Hard Drive.6. Click OK.7. Click Restart.8. Click OK.Note: If your hard drive has already been formatted, please skip to step 9

English69. Enter the User name and Password, and then click Config. User Name: admin Password: admin10. Click Advanced and then Wireless. No

English71. Select the hard drive, and then click Mount.2. Click OK.3. Double-click on My Computer. Then double-click on any mounted hard drive under